Line of green open freight wagons under overhead wires

Rubber & Elastomer Mechanical Testing Services | CrosLynk

The rig runs the duty cycle. The report shows what the part did.

3 AXES50 T10 M CYCLES0.01–10 HZ
TWO LABORATORIES, ONE REPORT

Prove the compound. Then prove the part.

A compound can pass every coupon test while the part still cracks in service. We test both.

On the compound

Coupons cut from moulded slabs

Same compound, same cure as production

  • Strength, hardness and set
  • Ageing, tear and wear
Qualifies the material batch
On the finished part

The assembly, loaded as fitted

Loaded the way it will be fitted

  • Stiffness against your drawing
  • Fatigue, on one axis or three
Qualifies the design and the process

Method on every line

Every result names its method.

Calibrated and traceable

Traceable calibration on every instrument.

Accredited laboratory

NABL-accredited group laboratory, Bengaluru.

Limits agreed first

Pass and fail agreed before the rig starts.

FIND THE RIGHT TESTS

Pick the part. See the programme.

Three choices, one click to add it to your enquiry.

Sector
The tests must

Example loaded: design validation of a railway part.

Railway
Suggested programme · validate a design

Bonded rubber-to-metal parts

  • Hardness
  • Tensile
  • Compression set
  • Stiffness
  • Fatigue

Send us: Finished parts and a slab of the same compound.

See the test details →
TENSION · COMPRESSION · HARDNESS · AGEING

Static Laboratory

Strength, hardness, set and ageing on your compound, and stiffness on the finished part.

Equipment and capacity

Universal testing machine
Tension & compression to 50 kN
Hardness
Shore A and Shore D durometers
Ageing
Air oven, time × temperature to spec
Humid ageing
Hydrolysis resistance, PU and nylon
Specimens
Slabs, discs, dumbbells or the part
Methods
To your specification
S · 8 TESTS

Static tests

Run on moulded slabs of your compound, or on the part.

Tensile & elongation

Strength and stretch of your compound.

Hardness, Shore A & D

Shore A and D, on slab or part.

Compression set

How much height the part keeps.

Tear strength

Resistance to a cut spreading.

Abrasion loss

Wear life against a reference.

Heat ageing & hydrolysis

Properties kept after heat and moisture.

Load–deflection & stiffness

The finished part against its drawing.

Density & ash

A quick batch-to-batch check.

Arranged on request

Through accredited partner laboratories.

Rubber-to-metal bondOzone resistanceFluid immersionLow-temperature brittlenessRebound resilienceStress relaxationCure curve, MDR
FATIGUE · MULTI-AXIS · DAMPING · CREEP

Dynamic Laboratory

A three-axis servo-hydraulic rig runs your finished part through its duty cycle.

Three-axis fatigue rig

Axes
3 independent
Load
Up to 50 t
Frequency
0.01 to 10 Hz
Endurance
Up to 10 million cycles
D · 4 TESTS

Dynamic tests

Run on the finished part.

Fatigue endurance

Millions of cycles on the finished part.

Multi-axis fatigue

Three directions at once, to your duty.

Dynamic stiffness & damping

Stiffness and damping across frequency.

Creep & permanent set

Height lost under steady and cyclic load.

SECTORS

Tested to the drawing your part is bought against.

Railway

Rolling-stock elastomers tested clause by clause, with third-party inspection when you need it.

Automotive

Stiffness and damping curves, before and after durability.

Industrial

Load, wear and set for parts that run all day.

FAQ

Questions buyers and quality teams ask first.

Is the laboratory accredited?

Yes. Testing runs in the NABL-accredited laboratory of our group facility in Bengaluru.

How long does a fatigue programme take?

It depends on cycles and frequency. Your quote gives the rig time and a date.

Can you test to our customer's specification?

Yes. Send the drawing or specification and we build the plan from it.

Can our inspector witness the tests?

Yes. We schedule the key steps on dates your inspector can attend.

Can you test parts made by another supplier?

Yes, including field returns side by side with new parts.

REQUEST A TEST QUOTE

Send the specification. We send back the plan.

We reply within one business day with the plan, price and dates.

What helps us quote fast

  1. 01
    Specification or drawingThe clauses you must meet.
  2. 02
    Part and materialPart name, compound and hardness, for example PU 90 Shore A.
  3. 03
    Load case and lifePeak load and target cycles.
  4. 04
    SamplesHow many parts or slabs you can send, and when.
TALK TO A TEST ENGINEER contact@croslynk.com No. 642, 6th Cross, Basaveshwarnagar, Bangalore 560079
Tests & programme
Static tests
Dynamic tests
Programme
Attach file
Attach specification, drawing or load case
PDF, DWG, STEP, XLSX, JPG, ZIP

We respond within one business day. Or use the full quote page.

Photographs: Unsplash, Pexels and Wikimedia Commons contributors, credited on each image. Reference photographs only.