TOOLING SERVICES · MOULDS, FIXTURES & MACHINING

Tooling, moulds & machined parts

The moulds, fixtures and metal parts behind your elastomer part, made and measured in one tool room.

MOULDS & DIESJIGS & FIXTURESCNC MACHININGASSEMBLY
±0.01 mmWire-cut profile accuracy
Ø 500 mmTurning diameter
1 mVMC table length
Ra 0.05 µmPolished cavity finish
Ball-nose end mill finishing a curved cavity in a metal block, with coolant on the surface Tool room
WHAT WE BUILD

Five services, one drawing trail.

One team for the tool, the metal parts and the fixtures. A drawing change stays in one shop.

SCOPE FINDER

Tell us the job. See a starting scope.

Three answers, one click to add it to your enquiry.

Sector
What you need
Quantity

Example loaded: a railway mould, pilot quantity.

Railway
Suggested scope · railway · mould or die

Moulds for rolling-stock parts

  • Design review
  • Build
  • First parts and report
  • Quantity 10–200

Documents: Material certificate, dimensional report, inspection support.

See the details →
SERVICE 01

Moulds & dies

Each tool is designed for its process and compound, then proven on a first moulding before series production starts.

Cavity accuracy
±0.02 mm
Polished finish
Ra 0.05 µm
Tool steel
Certified, hardened
Every tool
First-article report
Tools we build

Cast PU dies

Compression moulds

Transfer moulds

Injection moulds

Bonding tools

Soft, trim & repair

Moulding routes →
SERVICE 02

Jigs & fixtures

Built around the datums on your drawing, so part 200 matches part 1. Proven on your own parts before they leave.

Fixtures we build

Machining fixtures

Drill jigs

Welding fixtures

Assembly & bonding fixtures

Inspection gauges

Trim & deflash tools

SERVICE 03

Part machining

Bushes, sleeves, housings, plates and pins to your drawing, from one part to thousands, with or without a mould from us.

CNC turning
Up to Ø 500 mm
VMC milling
Up to 1 m table
Grinding
Flat to 0.01 mm
Wire-cut & EDM
±0.01 mm profiles
Boring & VTL
Large bodies and plates
Welding & repair
MIG and TIG

CNC turning

Up to Ø 500 mm, 1 m long.

VMC milling

Pockets, profiles and cavities.

Surface & cylindrical grinding

Faces flat to 0.01 mm.

Wire-cut & EDM

±0.01 mm profiles in hard steel.

H-boring & VTL

Large bores and heavy plates.

Welding & repair

Build-up, repair and fabrication.

SERVICE 04

Assembly

Most elastomer parts ship joined to metal. We bond, press and fasten them, then check the finished unit so it arrives ready to fit.

Joining
Bonded, cast-in, pressed, fastened
Traceability
Material lot to part marking
Proof
Tested on the finished unit
Test the assembly →
Face mill cutting a round steel part with chips and coolant spray

The part can only be as accurate as its tool. We measure both before anything ships.

±0.01 MMRA 0.05 µMFIRST ARTICLE ON EVERY TOOLCERTIFIED STEEL
INSPECTION & METROLOGY

Measured three times, reported once.

Checked before machining, at the machine and before dispatch. You get one report.

BeforeMaterial in

Drawing and material check

Drawing and certified material checked.

DuringAt the machine

First-off and in-process

First part measured in full.

AfterBefore dispatch

Final inspection and first article

Size, finish and hardness signed off.

Documents you can ask for

Dimensional reportFirst-article reportMaterial certificateHardness reportThird-party inspection
FAQ

Questions buyers ask first.

What do you need to quote?

A drawing or 3D model, the material, the quantity and the finish. For a mould, add the compound.

Can you machine parts without making the elastomer part?

Yes. Machining, fixtures and gauges run as standalone jobs.

Can you build a mould to our own design?

Yes. We review your design before cutting steel and build to your released revision.

Who owns the tool?

You do, once it is paid for. We store and maintain it while we mould your parts.

Do you work to approved-vendor drawings with third-party inspection?

Yes. We build to your drawing revision, supply material certificates and host your inspector.

How long does it take?

Simple turned parts from about 5 working days. Your quote gives a date for each step.

REQUEST A TOOLING QUOTE

Send the drawing. We send back the tool plan and price.

We reply within one business day with the plan, price and lead time.

What helps us quote fast

  1. 01
    Drawing and modelPDF, DWG or STEP.
  2. 02
    Material and finishFor moulds, the compound too.
  3. 03
    Quantity and timingPer order, per year, and when.
  4. 04
    DocumentsAny approvals or inspection you need.
TALK TO A TOOLING ENGINEER contact@croslynk.com No. 642, 6th Cross, Basaveshwarnagar, Bangalore 560079
Services
Moulds & dies
Jigs & fixtures
Part machining
Assembly
Quantity
Attach file
Attach drawing, 3D model or specification
PDF, DWG, DXF, STEP, IGES, SLDPRT, ZIP

We respond within one business day. Or use the full quote page.

Photographs: Unsplash and Pexels contributors under their free licences, credited on each image. Reference photographs only.